PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.
PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.
Nozzle Temperature:
245˚C – 265˚C
Printing Speed:
30mm/s – 50mm/s
Bed Temperature:
90˚C – 100˚C
Bed Surface:
BuildTak®, PEI sheet with ABS slurry
Cooling Fan:
LOW for better surface quality
OFF for better strength
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
Young’s Modulus:
2174 ± 285 Mpa
Tensile Strength:
33.3 ± 0.8 Mpa
Bending Strength:
59.0 ± 1.3 Mpa
Charpy Impact Strength:
12.6 ± 1.1 kJ/m2
Glass Transition Temperature:
101˚C
Vicat Softening Temperature:
104˚C
Melting Temperature:
N/A
Drying Settings:
80˚C for 8h