Dry and Store in One Solution
With one drying dock you can add as many PolyDryer Boxes as you need so your next project is always ready to go.
You’ll Never Have to Break the Seal Again
Don’t worry about moisture ruining your prints, the PolyDryer Box has the best sealing performance on the market.
Brings Your Forgotten Spools Back to Life
360° airflow secures even drying of your spool without damaging it. Compatible with all popular 3D printing materials with 3 preset power levels.
FAQ
Why are there only power levels but not temperature?
The 360° drying system creates a temperature distribution inside the PolyDryer. For that reason, a single temperature can't represent the true situation as it varies around the spool. Other elements like the room temperature, initial moisture content, spool size, and material type and weight also affect the internal temperature of the box.
How do I know what setting should I use?
The sticker on the dry dock lists all suitable power levels for most common materials. In general, using higher power level and longer drying time can achieve better drying result. If you are using materials from other brands, please check the softening temperature of the filament first before using a higher power level.
What spools can fit inside the PolyDryer？
The maximum capacity of PolyDryer box is 205 Φ * 78(H) mm. This means most 1KG or less than 1KG spools from Polymaker can fit inside the PolyDryer. For smaller spools use the internal spool roller for a better experience.
How long can materials stay dry in the PolyDryer Box?
The PolyDryer Box was designed with excellent sealing and silica gel desiccant to extend your filament storage time. In our internal experiment( an environment of 20℃ and 60% RH), the humidity inside the PolyDryer Box changed less than 5% in 30 days. In a comparison test the sealing capability of the PolyDryer™ Box is ~1.5 times that of a DIY storage box.
