Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
PolyMax™ PC-FR, creation from Covestro’s Makrolon® family, could achieve V0 performance in the UL94 flame retardancy test and displays excellent toughness, strength and heat resistance. This filament opens new applications in the automotive, railway and aerospace industries.
PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.
RECOMMENDED SETTINGS
Nozzle Temperature:
250˚C – 270˚C
Printing Speed:
30 – 50mm/s
Bed Temperature:
90˚C – 105˚C
Chamber Temperature:
90˚C – 100˚C
Bed Surface:
almost any surface with a thin coat of MAGIGOO PC
Cooling Fan:
OFF
Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different printers and nozzle diameters
MECHANICAL PROPERTIES
Young’s Modulus:
2634 ± 182 (MPa)
Tensile Strength:
67 ± 4.5 (MPa)
Bending Strength:
96.6 ± 1.3 (MPa)
Charpy Impact Strength:
11.7 ± 1.3 (kJ/m2)
THERMAL PROPERTIES
Glass Transition Temperature:
N/A
Vicat Softening Temperature:
116˚C
Melting Temperature:
N/A
NOTES
Drying Settings:
80˚C for 8h
Recommended Support Materials:
PolyDissolve™ S2
Other:
When printing with PolyMax™ PC-FR it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress when not using a heated chamber.
Annealing settings: 100˚C for 2h
Copyright © 2018 The Tech Deck, LLC - All Rights Reserved.
This website uses cookies. By continuing to use this site, you accept our use of cookies.